Installation recommendation-whenever possible, provided
for a minimum of 1-1/2”(40mm) bearing support at all grating support
points. Hold down clips should be used at the rate of one clip for every
6 square feet(0.56square meters) of grating minimum,or at least 4 clips
for any square or rectangular piece, or at least 3 for a triangular piece.
There are three kinds of clips made
of 316 stainless steel used for fixing Powergrid grating.
  |
  |
  |
| Type
L Type L Clips-For use in securing grating to support frames. |
Type M Type M Hold Down Clips-Designed to fix grating on support structure & prevent it from turning in all four directions. |
Type C Type C Clips-Applied to connect two adjacent grating bars. |
Installation Accessories for Powergrid® Pultruded Grating
Installation recommendation-whenever possible, provided
for a minimum of 1-1/2”(40mm) bearing support at all grating support
points. Hold down clips should be used at the rate of one clip for every
6 square feet(0.56square meters) of grating minimum,or at least 4 clips
for any square or rectangular piece, or at least 3 for a triangular piece.
Grating hold down clips for
pultruded products.
Type WP
|
Type MP |
Type GP
|
Type PP
|